Author Topic: Electrically Switched Magnets  (Read 1168 times)

Offline Vulcan Gasifier

  • EBN
  • Newbie
  • *
  • Posts: 20
  • Karma: +1/-0
    • Small scale gasification systems
Electrically Switched Magnets
« on: February 17, 2016, 05:31:26 PM »


Ok I replicated a switched magnet Robert Smith brought to our attention. Here is a video he did demonstrating this and along with how to build it. This is not an electromagnet.

https://www.youtube.com/watch?v=n4YD8Nvyfa4

For more in depth details of this device you can go here.

https://en.wikipedia.org/wiki/Electropermanent_magnet

I think this has big potential for at least one of my own designs. I plan on doing a complete redesign a linear/rotary motor I built some years ago that showed potential. Like may other free energy device it could not overcome the gates. However this devise has the potential of eliminated those gates with very little power input. Im not going to shoot for a free energy devise if some how that happens than that would be just fantastic. But the electric car is here and the market for new technologies to make them better is astronomical. I can see a need for more powerful but also very efficient motors, so this is the goal Im setting out for this project.

Cheers!


Nothing new here, you can go here for more detailed

Offline zero

  • Administrator
  • Full Member
  • *****
  • Posts: 123
  • Karma: +65534/-1
    • Alt-nrg
Re: Electrically Switched Magnets
« Reply #1 on: February 24, 2016, 01:57:07 PM »
This one really has my interest too. I was serious when I replied to Robert "You may have just made your own EESD obsolete." LOL!